Follow these easy steps to get your AEG LAVAMAT 61271 WDBI Dryer up and running in no time.
Carefully remove all packaging materials and the transit bolts. Keep the transit bolts for future use, for example, if you move the appliance.
Install the machine on a flat, hard floor. Ensure that the air circulation around the machine is not impeded by carpets or rugs. Use a spirit level to ensure the appliance is level, adjusting the feet if necessary.
Connect the water inlet hose to a water tap with a 3/4'' thread. Ensure the connection is tight to prevent leaks. Do not use old hose sets; always use the new ones supplied with the appliance.
The drain hose can be connected to the sink or to the drain pipe. Make sure the connection is secure and that there are no kinks in the hose.
Plug the power supply cable into a grounded electrical outlet. Ensure that the power requirements match those specified in the manual.
Before the first use, perform a rinse cycle. Place a wool or piled fabric rag inside the drum and perform a drying cycle of 10 minutes. Remove the wool cloth afterward. Now the appliance is ready for regular use.